Measure the linear footage of the area you intend to protect with a ZEEWALL bulkhead.

Using a plumb line, measure the distance from the mud line to the height of the finished seawall to identify wall height. Measure every six feet to make sure you identify variations in depth.

When determining the necessary length of sheet piling required for your project a rough rule of thumb is that at least 50 percent of the length of each ZEEWALL panel should be located beneath the mud line (Depending on soil characteristics).

Zeewall is sold by the square foot, and in order to determine square footage, you must multiply your length of sheet by the overall length of the wall. For example, if your exposure is 5 ft your sheet length would then be approximately 10 ft. Assume your overall length of wall is 100 ft. The following would apply. 10 ft X 100 ft=1,000 square feet.